PREVENTIVE MAINTENANCE TOOLS

-


1.  CRC 2-26

CRC Electrical Parts Cleaner is a quick-drying, non-chlorinated evaporating parts cleaner for use on electric motors and other heavy-duty electrical and mechanical equipment. It swiftly and effectively degreases, removes oil, dirt, wax and other foreign matter that are common causes of current leakages and electric inefficiencies.

  • FEATURES :
  1.  Cleans, lubricates, protects, penetrates, and loosens corrosion.
  2.    Prevents corrosion by displacing moisture.
  3.   Restores resistance values by reducing current leakage.
  4.    Provides precision lubrication by its thin, high dielectric strength, lubricating film
  5.  Helps restore water-damaged electrical equipment.
  6.   Frees rusted or seized parts by penetrating under dirt and scale into the finest       pores and cracks.
  7.  Can be used on all metals and alloys.
  8.   Will not harm modern plastics, painted surfaces, coatings and rubbers
  9.  Convenient 360° (upside-down) spray valve for aerosol.


  • Applications :
  1. Electric motors                                                           
  2. Generator and transformer windings.
  3. Electrical connectors
  4. Relays
  5. Circuit breakers
  6. Transformers
  7. Switch gears
  8. Generators
  9. Controls
  10. Instruments
  11. Communication assemblies
  12. Electronics
  13. Alarm systems
  14. Starters.


Comments

Post a Comment

Popular posts from this blog

ACB Tripping settings

-
Image
ACB tripping settings   Acb has 6 adjustable tripping settings 1 Long time delay (Tr ) 2 Short time delay( Tsd ) 3 Earth fault delay (Tg) 4 Long time (Ir) 5 Short time (Isd) 6 Earth Fault (Ig) Long time is for maximum overload capacity . Short time is for short circuit current Earth fault is for earth fault current . As per thumb Rule : 1. Long time set at 0.8 means 80% of full load current .Until this level of current  breaker carry without tripping  . Above 0.8 Acb trips. Long time delay causes the breaker to wait for certain time to allow heavy temporary inrush currents to pass away. Generally long time delay is set at  4 Sec. 2. Short time set at 0.6 means  60% of full load current . It determines the Amount of Current the Breaker will carry for short time period.  Generally short time delay set at 0.2 sec. 3. Earth Fault set at 0.3 or 30% of  fault current . It controls the amount of Ground Fault current that will caus...
Read more

Transformer Magnetic Oil Gauge Indicator

-
Image
conservator tank oil level (Mog) The MOG  (Magnetic Oil Gauge)  is a device by which we can supervise the level of oil inside the tank or conservator of power transformer and also gives us an alert low oil level indication .  A decrease in level of Transformer oil in Conservator is an indication of leak and therefore MOG level is an important parameter to be monitored. Practically under running condition oil level remains at 3/4 th level.
Read more

HIGHER EFFICIENCY MOTORS (HEM)

-
Image
Super premium Efficiency (IE4) motors  IE4 MOTOR The higher price of the IE4 motors is due to :  1. the use of high-quality materials and optimization of assembly and design of these motors to achieve higher efficiencies upto 97% . 2.  Large-diameter copper wires and more quantity of aluminum are used in rotors of these motors to reduce the resistance losses.  3. An optimized cooling fan is also used to reduce the winding losses. 4. use of advanced technologies like diecast copper rotors enables achieving higher efficiencies in the same frame size. The use of the high-quality, expensive materials increases the overall cost of this type of motors. adoption of energy efficient technologies to reduce their energy consumption and carbon emission. 5. Stator and Rotor I2R losses: Stator and Rotor I²R losses appear when heat is generated by resistance from current flowing in the stator windings, rotor conductor bars. These are major losses, typically account for...
Read more